Firmware - Build Guides
Kyria revision 2 Build Guide
Build guide for the second revision Kyria.
The Kyria rev 2 was first introduced in January 2022.
For the build, please follow the Aurora Build Guide, taking into account the remarks below:
- If a feature is not supported by the Kyria rev 2, you can skip the chapter in the build guide. This applies to the following:
- Per-key RGB
- Switch sockets, unless you're using Mill-Max sockets
Kyria rev 2.0 controller placement: If the revision of your Kyria is exactly 2.0, the controllers need to face with their back side facing away from you. This is the opposite of what the Aurora Build Guide tells you to do.
This only applies to revision 2.0. If you have a revision 2.1 or greater, you can follow the guide as usual.
If you need any assistance during your build, please see Getting help.
Revision 3
Build guide for the third revision Kyria.
Revision 1
Build guide for the first revision Kyria.
Questions? Help us improve!
Do you have questions after reading the documentation? Do you have feedback about this page, or about the documentation in general? Please send us an email. You can use the buttons below which will open your mail client or app with a template, or send your mail to support@splitkb.com.