🎉 You have finished building your Aurora keyboard! 🎉
Testing your keyboard
We have added a special "debug" keymap to each Aurora keyboard's QMK firmware. This should make it easier to test the various features of your board.
You can find these precompiled firmware files over at our firmware site. There are debug files, as well as default keymaps, and some keyboards will have Vial-compatible keymaps, too!
Not every keyboard fully works the first time. This is normal - it's a DIY kit after all!
We have made an entire section dedicated to troubleshooting and fixing the most common issues people run into, so head over to Troubleshooting!
If you still have questions afterwards, see How can I ask a question? for the best way to get them answered.
The schematics for all Aurora kits can be found under Schematics and are very useful during troubleshooting. Note: Not all schematics have been published yet.
If you wish to know what changed between revisions, go to Changelogs.
Each keyboard has a "default" keymap added to QMK. We recommend you use them as a starting point for your own keymap. Keymaps are highly personal, so don't be afraid to customize yours!
Want to share your thoughts?
This guide as well as the entire experience surrounding it has been built up using suggestions and feedback from people like you.
If you liked building your keyboard and shopping with us, and would like others to also experience that, please consider writing a review over at Trustpilot.
I hope you'll enjoy your new keyboard! 🎉
Getting more out of your keyboard
If you want tips on the various ways to use your keyboard, we recommend you read the following pages.
Don't forget to visit the Next Steps section for even more information.